Electric Continuous Operation Stainless Steel Cartridge Dust Collector With Pulse Filter

The dust-laden gas is introduced into the ash hoppers of each chamber through the air inlet pipe of the dust collector. With the help of the ash hopper guide device, large dust particles are separated and fall directly into the ash hopper. Meanwhile, the finer dust particles enter the middle box evenly and are adsorbed on the outer surface of the filter cartridge. The clean gas passes through the filter cartridge and enters the upper box before being discharged into the atmosphere through each offline valve and exhaust pipe.

The filter cartridge is made of folded and rolled polyester fiber with a closed lower end and the center of the upper end facing the lower end of the spray pipe. The dust-laden gas initiates a slower airflow speed in the dust collector. Coarse particles then depart from the airflow and settle in the dust collecting chamber. Fine dust particles are blocked on the outer surface of the filter cartridge when passing through the filter cartridge through the airflow. And finally, the clean gas is discharged from the air outlet.

When the equipment resistance reaches the specified resistance value, the cleaning control device opens the electric pulse valve according to the set program after the differential pressure setting value or the cleaning time setting value, and stops the air blowing. The compressed air is used to spray instantly to increase the pressure in the filter cartridge, and the dust on the filter cartridge is shaken off. Even sticky fine dust can be cleaned more thoroughly into the ash hopper and discharged via the ash discharge mechanism.

There are several components in the pulse filter cartridge dust collector, including an air inlet, a filter cartridge, an air outlet, an air bag, a pulse controller, a spray valve, a spray pipe, etc. The dust removal process is automatically controlled by the pulse controller, and pressure difference control or time control can be adopted.

Considering the dust remover's properties, it has high dust removal efficiency, good filtering effect, small size, and stable operation. The filter cartridge has a skeleton that is securely and properly sealed to ensure its long service life. The box body adopts an airtight design with excellent sealing properties. The inspection door uses top-quality sealing materials with a low air leakage rate. Lastly, the inlet and outlet air ducts are compact with low air flow resistance. It is typically used to purify dust-containing gases in chemical, food, pharmaceuticals, feed, metallurgy, building materials, cement, machinery, electric power, and light industries.